Type DID632A

  • Flush ceiling active chilled beam
  • Nominal width: 24" to suit t-bars at 2 ft centers
  • High cooling performance with low primary air flow air requirements
  • Two face designs
  • Two or four pipe configuration (heating and/or cooling)
  • Selection software featuring detailed comfort data and terminal velocities
  • Product Description
Ideal for schools and hospital patient rooms
TROX DID632A series active chilled beams feature angled heat exchangers and integral condensate trays.  While this beam was specifically designed for use in spaces where controlling room humidity levels can sometimes be a challenge, such as K-12 classrooms and hospital patient rooms, the condensate trays are intended only as an added emergency feature should the humidity rise unexpectedly. 
 
The design and positioning of the induction nozzles with the DID632A enhance the amount of secondary room air drawn across the internal heat exchanger, providing high cooling outputs with low amounts of primary air.
 
Benefits
 
  • Reduced ductwork
  • Reduced plant room sizes
  • Up to 130 Btu/h cooling per sq ft. of floor space, while still maintaining a maximum air velocity of 50 fpm in the occupied zone¹
  • 35% less primary air required for a typical application²
  • Can reduce main AHU air requirement by up to 82% compared to VAV systems
  • Up to 50% fewer chilled beams required for the same cooling capacity and primary airflow²
  • ¹Based on room height of 10 ft and occupied zone height of 3.5 ft
 
²Compared to Trox DID622-HC active chilled beam

Selection Tools

Selection Tool BIM File

Selection Tool

BIM File

more

Selection Tool Selection Programm

Selection Tool

Selection Programm

more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +1-770-569-1433 | Fax: +1-770-569-1435

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +1-770-569-1433 | Fax: +1-770-569-1435

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +1-770-569-1433 | Fax: +1-770-569-1435

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +1-770-569-1433 | Fax: +1-770-569-1435